Refrigerated compressed air dryer

Working conditions and design parameters

Plate heat exchanger, steam water separator, interconnection pipe and flange are made of stainless steel to prevent corrosion. Refrigerant gas is an environmental refrigerant. Dew point alarm - Option - displayed on the compressor control panel and drying unit to help maintain the quality and safety of air used in high pressure units such as bottle blowers, blow molding, etc.

Cooling Mode: Air Cooling

Treatment capacity:1-25.0 m3 / min

Refrigerant:R134a / R410A / R407C

Working Pressure:40 bar
Pressure Loss:0.2 bar
Pressure Dew Point:3℃～5℃@PDP
Intake Air Temperature:3℃～65℃
Ambient Temperature:3℃～50℃
Intake Air Temperature:65℃

Product Features

◆ The moisture content of compressed air is lower than that of similar products on the market, and the pressure dew point is 3-5c;
◆ Stainless steel plate heat exchanger and air connection pipe, high strength anti-corrosion.
◆ All refrigerants are environment-friendly refrigerant (R134a. R410A or R407C).
◆ Small size, compact structure, saving installation space.
◆ Digital display controller.

Technical parameter table of HSW series refrigerated air dryer

Product Model	Treatment Capacity	Compressor Power	Power Supply	Air Connection	Overall Dimension (mm)			Equipment Weight
Product Model	Nm³/min	KW	V/Ph/Hz	Caliber	Long	Wide	High	KG
HSW-1HTF/4.0	1.4	0.4		1/2	500	321	525	32
HSW-2HTF/4.0	2.4	0.7		3/4	660	450	650	50
HSW-3HTF/4.0	3.8	0.9	220/1/50	3/4	778	490	721	73
HSW-6HTF/4.0	6.5	1.1		1-1/2	830	500	830	84
HSW-8HTF/4.0	8.5	1.2		1-1/2	830	500	830	88
HSW-10HTF/4.0	10.7	2.2		1-1/2	1180	650	955	150
HSW-13HTF/4.0	13.5	2.3	380/3/50	1-1/2	1180	650	955	155
HSW-15HTF/4.0	18	2.5		2	1180	650	955	140
HSW-20HTF/4.0	25	3.0		DN65	1370	700	1363	210